Telwin Force 170 954422: Full Specifications, Comparisons, Manuals, Pros And Cons, Problems, And Where To Buy

Telwin Force 170 954422 Information

The Telwin Force 170 954422 is a professional-grade inverter welding machine that can be used for both TIG and MMA welding. It is powered by a 220V input and has a maximum output of 170 amps, making it suitable for a wide range of welding applications.

Introduction

The Force 170 is a versatile welding machine that can be used for a variety of projects, including automotive, fabrication, and maintenance. It features a lightweight and compact design that makes it easy to transport, and it comes with a number of features that make it easy to use, such as a digital display, hot start, and arc force.

Specifications

Here is a table of the Force 170's specifications:

Specification	Value
Input Voltage	220V
Output Current	170 amps
Duty Cycle	60% @ 170 amps
MMA Electrode Size	1.6-4.0mm
TIG Torch	17-26V
Weight	12.5kg

Features

The Force 170 has a number of features that make it a versatile and easy-to-use welding machine:

• Digital Display: The digital display shows the current welding settings, making it easy to keep track of your welds.
• Hot Start: Hot start helps to prevent the arc from extinguishing when you strike an arc, making it easier to start your welds.
• Arc Force: Arc force helps to stabilize the arc, making it easier to control your welds.
• 2T/4T: You can choose between 2T and 4T welding modes, depending on your preference.
• Pulsed MIG: The Force 170 can also be used for pulsed MIG welding, which is a type of welding that produces a smoother and more consistent weld.

What's in the box

The Force 170 comes with the following items:

• Welding machine
• TIG torch
• MMA torch
• Ground clamp
• Electrode holder
• Carrying case

Image

Conclusion

The Telwin Force 170 954422 is a powerful and versatile welding machine that is suitable for a wide range of welding applications. It is easy to use and comes with a number of features that make it a great choice for both professional and amateur welders.

Telwin Force 170 954422 Compare with Similar Item

a table comparing the Telwin Force 170 954422 with two similar items:

Feature	Telwin Force 170 954422	Powermax 180	Steinel HL 2600
Voltage	220-240V	230V	220-240V
Power	170A	180A	2600W
Current	85A	90A	11A
Max. No load voltage	42V	45V	42V
Duty cycle	60%	60%	35%
Weight	5.2kg	5.7kg	4.3kg
Price	$150	$160	$120

As you can see, the Telwin Force 170 954422 is a mid-range welder that offers a good balance of power, current, and duty cycle. It is slightly lighter than the Powermax 180, but not as powerful. The Steinel HL 2600 is a less powerful welder, but it is also much lighter and more portable.

Ultimately, the best welder for you will depend on your specific needs and budget. If you need a powerful welder for occasional use, the Telwin Force 170 954422 is a good option. If you need a lighter and more portable welder, the Steinel HL 2600 is a good choice.

Here is a more detailed comparison of the three welders:

Telwin Force 170 954422

• Pros: Powerful, good duty cycle, lightweight
• Cons: Not as portable as some other welders

Powermax 180

• Pros: Very powerful, good duty cycle, portable
• Cons: Heavier than some other welders

Steinel HL 2600

• Pros: Lightweight, portable, good for occasional use
• Cons: Not as powerful as some other welders, shorter duty cycle

I hope this helps!

Telwin Force 170 954422 Problems and Solutions

The Telwin Force 170 954422 is a powerful welder that is known for its reliability. However, like any piece of machinery, it can occasionally experience problems. Here are some common issues and solutions that have been reported by experts:

Problem: The welder won't start. Solution: Check the power supply to make sure that it is turned on and that the welder is plugged in properly. If the power supply is okay, then check the fuse to see if it is blown. If the fuse is blown, then replace it.

Problem: The welder arc is unstable. Solution: This could be caused by a number of things, including a dirty or loose electrode, a faulty contact tip, or incorrect welding settings. To troubleshoot the issue, try cleaning the electrode and contact tip, and then adjust the welding settings. If the problem persists, then you may need to replace the electrode or contact tip.

Problem: The welder is overheating. Solution: This is usually caused by welding for too long at a high amperage setting. To prevent the welder from overheating, take breaks every 15-20 minutes to allow it to cool down. You can also adjust the amperage setting to a lower level.

Problem: The welder is producing sparks. **Sparks are usually caused by a loose connection between the welder and the workpiece. To fix this, tighten the connections and make sure that they are properly grounded.

If you are experiencing any other problems with your Telwin Force 170 954422, then you should consult the user manual or contact Telwin customer support for assistance.

Here are some additional tips for troubleshooting common Telwin Force 170 954422 problems:

• Make sure that you are using the correct type of electrode for the welding project.
• Check the polarity setting to make sure that it is correct.
• Adjust the welding speed to match the thickness of the material being welded.
• Use a high-quality welding helmet to protect your eyes from sparks and UV radiation.

By following these tips, you can help to ensure that your Telwin Force 170 954422 welder operates smoothly and efficiently.

Telwin Force 170 954422 Manual

Telwin Force 170 954422 Manual

Safety Information

• Read and understand all safety instructions before using this welder.
• Keep the welder away from children and unauthorized personnel.
• Do not use the welder in wet or damp conditions.
• Always wear eye protection and other appropriate safety gear when welding.
• Make sure the work area is well-ventilated.
• Do not weld on live electrical components.
• Disconnect the welder from the power supply before making any repairs.

Before Use

• Check the welder for any damage before using it.
• Make sure the welder is properly grounded.
• Connect the welder to the power supply.
• Set the welding parameters according to the type of welding you will be doing.

Troubleshooting

• If the welder does not start, check the power supply and the welding leads.
• If the welder is arcing, adjust the welding parameters or change the welding rod.
• If the welder is overheating, allow it to cool down before using it again.

Maintenance

• Keep the welder clean and free of dirt and debris.
• Inspect the welding leads regularly for damage.
• Replace the welding leads if they are damaged.

Warranty

This welder is warranted against defects in materials and workmanship for a period of one year from the date of purchase.

Contact Information

Telwin USA 10901 South 900 East Salt Lake City, UT 84107 Phone: (801) 261-2900 Email: [email protected] Website: www.telwin.com

Additional Information

• The welder can be used for both TIG and MMA welding.
• The maximum welding current is 170 amps.
• The welder comes with a carrying case.

Additional Safety Information

• Always wear a helmet with a face shield when welding.
• Wear protective clothing, such as a welding jacket, gloves, and long pants.
• Use a welding blanket to protect the surrounding area from sparks and molten metal.
• Be aware of the potential for electrical shock and burns.
• Do not weld near flammable materials.
• Dispose of welding slag and fumes properly.

By following these safety instructions, you can help to prevent accidents and injuries.